- Order number: HAKP-B HAKP-B
With the PrintStar heat press, T-shirts, jackets, sleeves, trouser legs, bags, etc. can be professionally printed.
However, the decisive advantage of this heat press is that it opens automatically after the time has elapsed.
Exchangeable working plates
Small space requirement
Large opening angle
24 months manufacturer's warranty
Thanks to a quick-change device, the worktops can be exchanged in a few seconds without any tools. Because the worktops are free-standing, the textiles can be easily pulled on so that only the cut-out to be printed lies on top. This results in the following advantages:
Transfer prints on the reverse side are protected
no print creases
prints do not bleed through
In addition to the worktops standard sizes, we also produce custom sizes!
Electrics and display:
The temperature and time can be easily and quickly set and read on our clear display.
Fast heating and an even and constant temperature are guaranteed thanks to the latest Mikanit heating foil technology. Our heating plates, which we manufacture ourselves, are supplied as standard with a Teflon cover, which is fastened with a clamping device and can be replaced by the customer at any time.
In addition to the standard size heating plates, we also manufacture custom sizes!
The Teflon protection for the heater ensures, as the name suggests, that the heating plate is protected against dirt such as adhesive residues or paint. In addition, the Teflon can be cleaned very easily or, in the worst case, simply replaced with a new one.
A Nomex cover protects the worktop or the silicone rubber. The cover also makes it easier for the textile to slide over the worktop when it is pulled on. It can be washed or replaced.
The silicone rubber on the worktop contributes significantly to the printing result. Due to the wide range of printing possibilities, you will get different results with hard or soft silicone rubber pads. As we do not glue our pads to the worktops, the silicone rubber can also be exchanged for another one at any time. A medium-hard one is supplied as standard. However, you can also order a soft and a hard silicone rubber from us.
How it works
When the heat press is closed, a magnet is activated which keeps the machine closed until the set time has elapsed. then the magnet is automatically deactivated and the heat press opens automatically. The pressing process can also be interrupted before the time has elapsed by means of a push button. The pressure can be adjusted via an easily accessible knurled screw.
Suitable for all transfer applications
Type of construction
Heating plate formats in cm
45x35 / 50x40
approx. 0.5 kg/cm2 depending on plate size
approx. 60 kg
Dimensions (WxDxH) in cm
Power / connection
230V / 10A / 2200W
Scope of delivery
Teflon cover, Nomex nettle protective cover, silicone rubber
Miscellaneous Quick-change system for different worktops, Mikanit surface heater
Interchangeable plates in cm
15x15 / 20x20 / 30x15 / short sleeves 12x20 / long sleeves 35x10 / 30x20 / 30x35 / 35x45 / 50x40 / 35x45 Polo / 35x45 jackets / (Other sizes on request)